| PrimaFIX adhesive - Prevent warping | +79,00 DKK |
0
Vare:
Varer:
(tom)
Ingen varer
Fastlægges senere
Forsendelse
0,00 DKK
Moms
0,00 DKK
I alt
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Antal
I alt
Der er 0 varer i din kurv Der er 1 vare i din kurv
Varer i alt
(inkl. moms)
Forsendelse i alt (inkl. moms)
Fastlægges senere
Moms:
0,00 DKK
I alt
(inkl. moms)
Derfor skal du bruge EasyPrint!
- 1 kg på spolen
- Perfekt spole, ikke mere sammenfiltrede filamenter
- Meget let at printe med et bredt temperaturspænd på 210° – 235° C
- Perfekt rundhed
- Perfekt diametertolerance inden for +/- 0,02 mm
- Smart længdeindikator på spole
- Fremstillet af 100% jomfruligt PETG-materiale
Med EasyPrint filament vil din succesrate være meget højere!
På Fjernlager
23072
Skriv bedømmelse
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
EasyPrint PETG is the perfect addition for you filament collection. It has many unique features which makes it one of the most versatile filaments in our portfolio. You can make beautiful prints in ""vase mode"" with more than 90% light transmission and almost no haze. EasyPrint PETG doesn´t release any toxic or irritating fumes when printing.
EasyPrint PETG has very good interlayer adhesion which makes it extremely easy to print with. If you have a heated build plate we suggest that you use a temperature around 40-60 ˚C
EasyPrint PETG sticks on BuildTak, PEI sheet and glass plate coated with adhesive spray or glue stick.
- Full weight!
On every spool of EasyPrint you will have a perfect spooled filament with a weight of 1 kg or 3 kg depending on what your needs are. When you compare price and performance EasyPrint is hard to beat! - Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C - Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging - Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm - Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned. - Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PETG and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use. - Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool. - EasyPrintsticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60° C
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
| Mærke | EasyPrint |
| Materiale | PETG |
| Diameter | 1.75mm |
| Diameter tolerance | +/- 0,02 mm |
| Farve | Sort |
| Vægt | 1000g |
| Print temperatur | 210°C - 230°C |
| Opvarmet seng krævet | Nej |
| Anbefalet temperatur på seng | 40°C - 60°C |
| Byggeplade overflade klæbemiddel | Anbefalet men ikke nødvendig |
Must-have accessories
Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator /
Essential Data:
| Material | PETG |
| Diameter | 1.75mm |
| Tolerance | ± 0.02 mm |
| Heated build platform required | No, but recommended |
| Print Temperature | 210 - 235° C |
| Weight Filament | 1 kg (1000g) |
| Total lenght on spool | 335 m +/- 1% |
| Spool Size | 200 x 66 mm |
| Spool Hub Diameter | 54 mm |
| Empty spool weight | 142g |
Technical data
| Physical | Test method | Value |
| Density | ASTM D1505 | 1.27 g/cm3 |
| Water Absorbation (24 hour immersion) | ASTM D570 | 0.2 % |
| Rockwell hardness | ASTM D785 | 116 R-scale |
| Shrinkage | ASTM D955 | 0.2 - 0.5 % |
| Mechanical | ||
| Tensile strenght @ Yield | ASTM D638 | 53 MPa |
| Tensile strenght @ Break | ASTM D638 | 26 MPa |
| Elongation @ Yield | ASTM D638 | 5.0 % |
| Elongation @ Break | ASTM D638 | 70 % |
| Flexural Strenght | ASTM D790 | 80 MPa |
| Flexural Modulus | ASTM D790 | 2150 MPa |
| Izod Impact Strenght (Notched @ 23°(73°F) | ASTM D256 | 90 J/m |
| Thermal | ||
| Heat Distortion @ 0.455 Mpa | ASTM D1003 | 74° C |
| Vicat Softening Temperature | ASTM D1525 | 83° C |
| Optical | ||
| Light Transmittance | ASTM D1003 | 90 % |
