Ingen varer
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Der er 0 varer i din kurv Der er 1 vare i din kurv
- Produceret i Europa
- Høj kvalitet PETG Resin
- Flotte klare prints
- Livlige farver
- Ingen stringing
- Ingen warping
- Ingen tilstoppelse
- Tolerance +/- 0.02mm
- Rundhed +/- 0.01mm
På lager online & butik
PETG (polyethylene terephthalate) filament is a plastic thread that combines the properties of the ABS filament (solid, temperature-resistant, extremely durable) and the PLA filament (easy to print). Because of these properties, PETG is a filament for 3D printing that you must have. It is environmentally friendly and can be recycled after use. Precisely because of its excellent chemical stability, PETG is a material that meets all the requirements of the European Parliament and the Council on artificial substances in contact with food products and medicines. We can find it in water bottles, clothing fibers and food containers.
Our PETG filament is extremely durable, solid, and odorless. It is an excellent filament that combines a combination of strength and flexibility, so it is also used for printing mechanical products in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.
For good results, you must print at a temperature of 220–240°C, and the printing table should be heated to 80-90°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.
The advantage of PETG material is that is very easy to print; you do not need a 3D printer with an enclosure, and the print speed is comparable to the printing of PLA filament. The PETG material has an excellent support structure due to the strength that helps to ensure that the layers are perfectly adhering during the printing, and consequently the products are structurally strong and resistant to mechanical influences.
✔️ Flexible
✔️ Durable
✔️ Easy to print
❌ Susceptible to moisture
❌ Surface scratches easily
Strength: High| Flexibility: Medium | Durability: High
Difficulty to use: Low | Shrinkage/warping: Minimal
Soluble: No | Food safety: Azurefilm PETG is food safe (here is the certification)
| Mærke | Azurefilm |
| Materiale | PETG |
| Diameter | 1.75mm |
| Diameter tolerance | +/- 0,02 mm |
| Vægt | 1000g |
| Print temperatur | 220°C - 240°C |
| Opvarmet seng krævet | Ja |
| Anbefalet temperatur på seng | 80°C |
| Lager | Butik |
| Kompatibel - Bambu Lab AMS | Ja |
ABOUT COMPANY
Our vision is as clear as the clear blue skies. We create, rise and broaden horizons. The sky is our only limit and there are no boundaries. Here and there, backwards and forwards, down and, of course, up. X-times, countless times. Our world comes in many shapes and dimensions. It has its depth, width and height, whereas the most important dimension is your imagination. Creativity has no boundaries, it is limitless and it never stops.
AzureFilm is 3D filaments manufacturer from Slovenia. With over 30 years of experience in plastic industry we offer one of the best quality 3D filaments all over the world. With an expert team of specialists and engineers as well as own factory located in Sežana (near Italian border), we are delivering a complete line of products that are fully designed and manufactured by our team in Slovenia. Apart from being first choice for 3D filaments in Slovenia, our products are now sold in more than 30 countries in Europe, USA and selected markets all over the world. We are manufacturing our own spools and are able to plastic inject spools for other brands too. With our own in-house production for CNC milling we are able to make molds for specific designs and satisfy needs of the most nit picky customers. We are a reliable partner offering high quality, support, design and production at the highest level.
Test specimens print settings:
|
3D printer: Creality Ender 3 |
Infill: 20 % |
Nozzle temperature: 230 °C |
|
Slicer: Cura |
Shells: 2 |
Bed temperature: 80 °C |
|
Nozzle: 0,4 mm |
Layer height: 0,2 mm |
Print speed: 50 mm/s |
Printing Recommendations:
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.
Access to all technical data sheets can be found here.
