0
Vare:
Varer:
(tom)
Ingen varer
Fastlægges senere
Forsendelse
0,00 DKK
Moms
0,00 DKK
I alt
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Antal
I alt
Der er 0 varer i din kurv Der er 1 vare i din kurv
Varer i alt
(inkl. moms)
Forsendelse i alt (inkl. moms)
Fastlægges senere
Moms:
0,00 DKK
I alt
(inkl. moms)
PEI Ultem (Polyetherimide) fra Prima Filaments er en genanvendelig, relativt vedligeholdelsesfri opbygningsoverflade, der giver bedre vedhæftning og mindre vridning.
Funktioner
- PEI Ultem (Polyetherimide) opbygningsoverflade - mindre skævhed og mere vedhæftning
- Perfekt til ABS og PLA-baserede filamenter og mange flere
- Der er ikke behov for yderligere klæbemidler
Ikke på lager
22624
Få besked når varen er på lager
Skriv din e-mail-adresse her, hvis du vil have besked når vi igen har denne vare på lager:
Jeg ønsker en e-mail når varen kommer på lager
Skriv bedømmelse
PEI Ultem (Polyetherimide) from Prima Filaments is a reusable, relatively maintenance free, build surface for both ABS (with a Heated bed) and PLA (hot or cold), other materials such as Metal, Wood, PETG, ABS+ and many others also works just fine. You don’t require any additional adhesives such as glue or tape. PEI is appealing due to its "no-surface-prep" conditions, which make it convenient to work with. Additionally, printing on PEI requires no support rafts as parts adhere directly to the surface with no issue.
How To Use
PEI is easily cut to size by scoring with a hobby knife. Once you have laminated your sheet of PEI onto your glass, simply re-level your print bed and print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just “pop” the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use acetone, isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.
How To Use
PEI is easily cut to size by scoring with a hobby knife. Once you have laminated your sheet of PEI onto your glass, simply re-level your print bed and print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just “pop” the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use acetone, isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.
Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator / Primacreator /
