xTool D1 Pro 20W - Higher Accuracy Diode DIY Laser Engraving & Cutting Machine

XTOOL XTOOL

Ultra nøjagtig og hurtig laserskærer og graveringsmaskine

  • Op til 400 mm/s arbejdshastighed for at øge din produktivitet
  • Højere nøjagtighed og stabilitet ved holdbar mekanisk struktur
  • Kompatibel med LightBurn og 3 typer forbindelse (USB, WIFI, TF-kort)
  • Auto-stop, hvis der registreres flamme/bevægelse eller væltning for ekstra sikkerhed
  • Rotary er ekstratilbehør

Flere detaljer

På Fjernlager

28236

10 990,00 DKK

inkl. moms
10990

XTOOL D1 PRO

Better Laser Enhances Cutting & Engraving Effect

Use innovative dual laser technology to combine two laser beams into one spot. The compressed spot has higher power, higher cutting ability, faster speed and better effect under the same electric power. The power of 10W dual laser xTool D1 is equivalent to a single laser 15W laser cutting machine.

Wood & Acrylic Cutting(One-PASS)

Explore The Beauty of Acrylic

* Limited by the characteristics of the material itself, the semiconductor laser (blue laser) can only cut dark acrylic materials.

Directly Engrave Stainless Steel Metal

No coating needed - Faster speed - Darker engraved pattern

Higher Productivity at A Higher Speed

Improve The Accuracy to The Extreme

Why D1 Pro Provide the Highest Accuracy

Engraving / Cutting accuracy to reach 0.004 inches Repositioning accuracy down to less than 0.007 inches.

Easily and Precisely Adjust the Focus

Easy Focus Adjustment

Only take 3 steps to adjust the focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, recover the focus lever.

Invigorate Your Creations with 340+ Colors

Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal.

Limit Switches in All Directions

Limit switches will trigger the alarm if the laser head is about to hit the boundary of the machine in All Directions.

Safe to Use

The emergency stop will be triggered by the detection of flames, smoke and tipping.

Better Software at Your Service

Get started quickly with our user-friendly software: XCS

Updating Project Files  Batch Processing with Circular Array  Default Working Parameters for Materials

xTool Creative Space

Compatible with mature engraving software: LightBurn

The layout, editing, and control software for common laser cutter. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.

 

Better Work with The Accessories

Details Matters

New Protective Design for Laser

New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.

Large Engraving Area

A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.

The Risers

Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.

Just Connect

You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.

Skriv bedømmelse

Skriv bedømmelse