Ingen varer
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Der er 0 varer i din kurv Der er 1 vare i din kurv
Magigoo PA - The 3D printing adhesive
Har du problemer med vridning ved 3D-print? Så er MAGIGOO en letanvendelig 3D-printklæbestof designet til at løse problemet med det første ikke-klæbende lag (vridning). Dette er det mest almindelige problem i 3D-print til fremstilling med FFF/FDM-teknologi.
- Pen med klæbemiddel får dine 3D-print til at klæbe til overfladen nemt
- Reducerer vridning til et minimum
- Spar tid, filament og nerver
På Fjernlager
23784
Magigoo PA is designed for professional use, to work exclusively with
Polyamide filaments.(Nylon) The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Why Magigoo PA?
PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA66 and PA6.
Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.
Nylon filaments prove to be challenging materials for FDM printing due to their lower
adhesion to conventional 3D-printing build surfaces and their higher tendency to warp.
Furthermore there are several classes of PA filaments each behaving differently.
MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was
developed to work with a wide number of PA types
