Bondtech DDX For Creality 3D printers

The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.

Adapter set required

The DDX will be compatible with most Creality 3D printers from Ender and CR series. The DDX requires an adapter set for each model, or set of models. Specific hotends, other than the original, will also need a specific adapter.

Product includes:

• 1x DDX Extruder
• 1x Nema17 Pancake stepper motor
• 1x Thumbscrew Assembly
• 1x 70cm Stepper motor extension cable
• 1x 70cm PTFE tube
• 1x 7cm Capricorn tube
• 3x Zip-ties
• 3x M3x10mm screw
• 2x M3x20mm screw
• 1x M3x10mm round head screw

 To be compatible with Creality 3D printers the DDX requires an adapter set.

Upgrading the Hotend

The hotend that ships with the Creality CR-10S Pro is the only that does not require an adapter. Please be aware that models without write access to the EEPROM, like the Ender-3 and CR-10, do not allow upgrading the hotend to Copperhead™ or Mosquito™.

Using a bed probe with DDX

The DDX was designed to allow space for the bed probe to be attached to the x-carriage. In models where there is no space to attach a bed probe, like the BLtouch, to the X-carriage, a mount can printed and attached to the right hand side of the DDX.

Bondtech DDX Direct Drive eXtruder

This Direct Drive eXtruder from Bondtech is a high performance, high reliability 1,75mm Dual Drive extruder for Creality 3D printers, based on our very popular BMG. Bondtech’s unique Dual-Drive technology in the BMG extruder, combined with a genuine E3D’s v6 HotEnd gives you a direct drive extruder with problems free material feeding and enables the use of a wider range of materials. The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.

Make your 3D printer even better

Bondtech DDX Direct Drive eXtruder for Creality is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. The DDX housing design provides an effective Hot-End cooling.  With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved.

Easy To Setup

For ease of setup the kit is attached to the carriage with only 2 screws.