Ingen varer
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Der er 0 varer i din kurv Der er 1 vare i din kurv
Flydende lim til byggeplader
- Kan anvendes til PLA / ABS / PETG
- Kan anvendes på X1 og P1 serien
Ikke på lager
40-040
Skriv din e-mail-adresse her, hvis du vil have besked når vi igen har denne vare på lager:
Jeg ønsker en e-mail når varen kommer på lager
Overview
The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping.
Features
- Excellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished.
- The Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with glue stick, liquid glue for build plate will leave less residue on the printed model and is easier to clean up.
- Compared with glue stick, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface
- The ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues
Recommended Settings
| Material | Hotbed Temperature |
| PLA | 40~60°C |
| ABS | 90~100°C |
| PETG | 60~80°C |
| PET | 80~100°C |
| TPU | 30~45°C |
| ASA | 90~100°C |
Instructions
Apply pressure to the applicator head to open the internal valve; then, spread glue evenly over the print area. After printing, simply clean the build plate and the bottom of the model with water.
