Log ind

0 Vare: Varer: (tom)

Ingen varer

Fastlægges senere Forsendelse

0,00 DKK Moms

0,00 DKK I alt

Priserne er inklusiv moms

Afslut bestilling

Varen er nu lagt i din kurv

Antal

I alt

Der er 0 varer i din kurv Der er 1 vare i din kurv

Varer i alt (inkl. moms)

Forsendelse i alt (inkl. moms) Fastlægges senere

Moms: 0,00 DKK

I alt (inkl. moms)

Fortsæt indkøb Afslut bestilling

Bambu Lab Cool Plate

Bambu Cool Plate består af en Bambu Engineering Magnetic Flex Plate med en Cool Plate mærkat forudinstalleret

Flere detaljer

Ikke på lager

Reference: 40-004

249,00 DKK

inkl. moms

249

Sammenlign

Få besked når varen er på lager

Skriv din e-mail-adresse her, hvis du vil have besked når vi igen har denne vare på lager:

Jeg ønsker en e-mail når varen kommer på lager

Skriv bedømmelse

Overview:

The Bambu Cool Plate is comprised of a Bambu Engineering Magnetic Flex Plate with a Cool Plate sticker pre-installed which is a consumable printing surface that is used in conjunction with a thin coat of glue stick and works best for filaments that don't require a high temperature set to the heated.

The Bambu Cool Plate leaves a smooth finish to printed models that come in contact with the Cool Plate and might require a bit of post-processing for cleaning up the glue stick.

Recommended settings for Bambu Cool Plate

These are some recommendations for settings to get the best results while using the Bambu Cool Plate. Please note that these settings are just a recommendation, and other slicer settings might need to be adjusted based on the printed model and the filament requirements.

Material	Hotbed temperature	Glue Stick Required?	Upper Glass Cover Plate Removed?
PLA	35℃~45℃	Yes	Either
ABS	90℃~100℃	Yes	No
PETG	60℃~80℃	Yes	No
TPU	30℃~35℃	Yes	Either
ASA	90℃~100℃	Yes	No
PVA	35℃~45℃	Yes	Either
PLA CF	35℃~45℃	Yes	Either
PLA GF	35℃~45℃	Yes	Either

Recommended settings for Bambu Engineering Plate

These are some recommendations for settings to get the best results while using the Bambu Engineering Plate. Please note that these settings are just a recommendation, and other slicer settings might need to be adjusted based on the printed model and the filament requirements.

Material	Hotbed temperature	Glue Stick Required?	Upper Glass Cover Plate Removed?
TPU	30℃~35℃	Recommended	No
PC	100℃~110℃	Yes	No
PA	100℃-120℃	Yes	No
PA CF	100℃~120℃	Yes	No

The Bambu Cool Plate can support a square print area of 256*256mm with rounded corners. It is suitable for all Bambu 3D Printer models.

Benefits of using the Bambu Cool Plate

Works best with low glass transition temperature filaments as it can be used at a low temperature for the hotbed.

Works well with the Automatic Calibration for Flow rate and does not interfere with the LIDAR.

Does not require the front glass door or top glass cover to be removed when used.

Smooth texture on the surface of the print.

Excellent adhesion and easy print removal.

Can be replaced by the user.

Downsides to using the Bambu Cool Plate

Cannot be used without glue stick as the surface can be easily damaged if glue stick is not used.

It is not recommended for high-temperature materials as bubbles can form underneath the print surface and cause damage.

Considerations for using the Bambu Cool Plate

Always apply a uniform thin coat of glue stick, to ensure a longer lifetime for the Cool Plate.

Regularly clean the print surface with dish soap and hot water to eliminate any dust or grease residue, which might lead to adhesion problems.

Do not clean the Cool Plate with Acetone, as it might damage the surface.

Always wait for a few minutes before removing printed models to allow them to cool down for easy print removal and avoid bubbles forming underneath the printing surface.

Installation steps

When installing the Bambu Cool Plate, please use the location of the text to help you install the plate in the correct orientation. The upper left and right rounded corners of the Cool Plate should be aligned with the left and right fixed points of the heating platform and gently lowered to be secured by the magnet.

Spare Parts Category	BYGGEPLADER

Vær den første til at skrive en anmeldelse !

Technical Specifications

Material	Engineering steel plate + Cool Plate sticker
Surface temperature resistance	Up to 120℃
Flexible spring steel thickness	0.5 mm
Cool Plate sticker thickness	0.4 mm
Usable print size	256*256 mm
Package size	2902904 mm
Package weight	320g
Color	Dark Grey

Der er 0 varer i din kurv Der er 1 vare i din kurv

Bambu Lab Cool Plate

Overview:

Recommended settings for Bambu Cool Plate

Recommended settings for Bambu Engineering Plate

Benefits of using the Bambu Cool Plate

Downsides to using the Bambu Cool Plate

Considerations for using the Bambu Cool Plate

Installation steps

Skriv bedømmelse

Skriv bedømmelse

Technical Specifications

Produkter fra samme producent

Kunder, der har købt dette produkt, har også købt: